A wearable nanoscale heart sound sensor based on P(VDF-TrFE)/ZnO/GR and its application in cardiac disease detection

• Yi Luo,
• Jian Liu,
• Jiachang Zhang,
• Yu Xiao,
• Ying Wu and
• Zhidong Zhao

Beilstein J. Nanotechnol. 2023, 14, 819–833, doi:10.3762/bjnano.14.67

• energy harvesting [15]. Applying machine learning classification algorithms in the domain of human physiological signal detection is presently a prominent area of research. A notable study by R. Guo et al. [16] successfully integrated deep learning techniques with frictional hydrogel sensors to achieve

• piezoelectric devices. A higher value of the piezoelectric coefficient signifies superior device performance [34]. In the context of energy harvesting from piezoelectric films, Equation 2 defines the relationship between the relative charge (Q) generated on the surface of the piezoelectric material, with an

Conjugated photothermal materials and structure design for solar steam generation

• Chia-Yang Lin and
• Tsuyoshi Michinobu

Beilstein J. Nanotechnol. 2023, 14, 454–466, doi:10.3762/bjnano.14.36

• efficient energy harvesting from the environment, and this is beneficial for water evaporation. Furthermore, when light is vertically irradiated, 3D evaporators provide an opportunity of water evaporation from the sidewalls that are not directly irradiated by light. The evaporation from the sidewalls leads

• to a lowering of the surface temperature of the sidewalls, allowing for further energy harvesting from the environment. All these processes will contribute to the increase in the overall water evaporation amount. Shao et al. fabricated a nickel–cobalt bimetal (Ni1Co3@PDA) coated with self-polymerized

Bismuth-based nanostructured photocatalysts for the remediation of antibiotics and organic dyes

• Akeem Adeyemi Oladipo and
• Faisal Suleiman Mustafa

Beilstein J. Nanotechnol. 2023, 14, 291–321, doi:10.3762/bjnano.14.26

Application of nanoarchitectonics in moist-electric generation

• Jia-Cheng Feng and
• Hong Xia

Beilstein J. Nanotechnol. 2022, 13, 1185–1200, doi:10.3762/bjnano.13.99

• improve the efficiency of energy harvesting in MEGs, and a considerable number of studies have focused on nanomaterials [9][21]. The generation of a flowing current through the injection of water flow into carbon nanotubes was one of the initial studies of MEGs [4][5][10][22][23]. Since then, more works

• biocompatibility and plasticity. Nanoarchitectonics for MEGs can be constructed using organic or inorganic materials alone, or organic–inorganic composite nanomaterials [29][30][31]. The energy-harvesting component can gather significant amounts of energy for daily use by employing suitable nanomaterials and an

• , there are also some novel innovations in energy-harvesting structures, such as the construction of lateral gradients of nanomaterials, the construction of multilayer structures, and the direct use of ion distribution gradients in liquids. With a PVP thin film of 290 nm thickness as the dielectric layer

The effect of metal surface nanomorphology on the output performance of a TENG

• Yiru Wang,
• Xin Zhao,
• Yang Liu and
• Wenjun Zhou

Beilstein J. Nanotechnol. 2022, 13, 298–312, doi:10.3762/bjnano.13.25

• ], many attempts have been made to enhance the energy harvesting efficiency. There are four ways to enhance the efficiency of energy collection. These are (1) surface treatment of the contact materials, including increasing the surface roughness and physical surface modification to enhance the surface

• sizes on the energy harvesting efficiency of the TENG were studied. The enhancement effect of different surface charge density distributions on the output performance of the nanostructured metal TENGs is explained. Experimental Materials and characterization In this study, 1 M sulfuric acid, copper

Piezoelectric nanogenerator for bio-mechanical strain measurement

• Zafar Javed,
• Lybah Rafiq,
• Muhammad Anwaar Nazeer,
• Saqib Siddiqui,
• Muhammad Babar Ramzan,
• Muhammad Qamar Khan and
• Muhammad Salman Naeem

Beilstein J. Nanotechnol. 2022, 13, 192–200, doi:10.3762/bjnano.13.14

• . Piezoelectric materials offer advantages as transducers, sensors, and energy-harvesting devices. Commonly, ceramics and quartz are used in such applications. However, polymeric piezoelectric materials have the advantage that they can be converted into any shape and size. In smart textiles, polyvinylidene

• usually non-polar as their structural packing is anti-parallel [21]. Usually, PVDF is non-reactive towards acids and bases. It was discovered in 1969 that PVDF can produce electrical signals. Thus, it can be used in various applications of energy harvesting, in various forms such as fibers, films

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• noticeable impact on the structure of the SnO2 component. Still, its presence strongly enhanced energy harvesting and charge separation in the resulting composite [36]. Regarding the self-doping SnO2, Pham et al. reported on the fabrication of a SnO2−x/g-C3N4 heterojunction, inducing an S-scheme interface

Enhancement of the piezoelectric coefficient in PVDF-TrFe/CoFe₂O₄ nanocomposites through DC magnetic poling

• Marco Fortunato,
• Alessio Tamburrano,
• Maria Paola Bracciale,
• Maria Laura Santarelli and
• Maria Sabrina Sarto

Beilstein J. Nanotechnol. 2021, 12, 1262–1270, doi:10.3762/bjnano.12.93

• the use of a top electrode or of high magnetic fields (the maximum value of d33 was obtained at 50 mT, using a current of 0.4 A) making the PVDF-TrFE/CoFe2O4 nanocomposite suitable for the fabrication of highly efficient devices for energy harvesting and wearable sensors. Keywords: CoFe2O4; magnetic

• poling; piezoelectric effect; piezoresponse force microscopy (PFM); poly(vinylidene fluoride-co-trifluoroethylene); PVDF-TrFe; PVDF-TrFe nanocomposites; Introduction In the last years, innovative energy harvesting systems based on the piezoelectric effect, able to convert vibrational mechanical energy

• piezoelectric and ferroelectric properties, high chemical resistance, high thermal stability, large polarization, short switching time, and mechanical flexibility. All these combined characteristics make it suitable for a wide range of advanced applications, from sensing to energy harvesting [8][9][10][11]. It

Nanogenerator-based self-powered sensors for data collection

• Yicheng Shao,
• Maoliang Shen,
• Yuankai Zhou,
• Xin Cui,
• Lijie Li and
• Yan Zhang

Beilstein J. Nanotechnol. 2021, 12, 680–693, doi:10.3762/bjnano.12.54

• Society. NG-based self-powered traffic sensor. (a) PENG attached to a tire with adhesive tape [5]. Figure 6a,b was reproduced from [5]. Copyright © 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim. Used with permission from Youfan Hu et al., “A Nanogenerator for Energy Harvesting from a Rotating Tire and

A stretchable triboelectric nanogenerator made of silver-coated glass microspheres for human motion energy harvesting and self-powered sensing applications

• Hui Li,
• Yaju Zhang,
• Yonghui Wu,
• Hui Zhao,
• Weichao Wang,
• Xu He and
• Haiwu Zheng

Beilstein J. Nanotechnol. 2021, 12, 402–412, doi:10.3762/bjnano.12.32

• with the hand. The S-TENG device can be made into various shapes and sizes, and can be freely placed on different parts of body to harvest human motion energy. It has been proven that the device is suitable for wearable energy harvesting. A large-scale device could be used to power portable electronic

Toward graphene textiles in wearable eye tracking systems for human–machine interaction

• Ata Jedari Golparvar and
• Murat Kaya Yapici

Beilstein J. Nanotechnol. 2021, 12, 180–189, doi:10.3762/bjnano.12.14

• , there have been many studies on skin-compatible, body-worn devices, collectively referred to as wearable electronics, for applications ranging from energy harvesting to human health and motion monitoring [28][29][30][31][32][33][34]. In a second demonstration, we have investigated the potential of the

Paper-based triboelectric nanogenerators and their applications: a review

• Jing Han,
• Nuo Xu,
• Yuchen Liang,
• Mei Ding,
• Junyi Zhai,
• Qijun Sun and
• Zhong Lin Wang

Beilstein J. Nanotechnol. 2021, 12, 151–171, doi:10.3762/bjnano.12.12

• life, paper-based TENGs (P-TENGs) have shown great potential for various energy harvesting and interactive applications. Here, a detailed summary of P-TENGs with two-dimensional patterns and three-dimensional structures is reported. P-TENGs have the potential to be used in many practical applications

• , including self-powered sensing devices, human–machine interaction, electrochemistry, and highly efficient energy harvesting devices. This leads to a simple yet effective way for the next generation of energy devices and paper electronics. Keywords: energy harvesting; interaction; Internet of Things (IoT

• sustainable. In recent years, the triboelectric nanogenerator (TENG), first invented by the Wang group in 2012 [14], has been quickly developed to be a revolutionary breakthrough in the energy harvesting [15][16][17][18][19][20][21] and self-powered systems [22][23][24][25][26][27]. Based on electrostatic

Seebeck coefficient of silicon nanowire forests doped by thermal diffusion

• Shaimaa Elyamny,
• Elisabetta Dimaggio and
• Giovanni Pennelli

Beilstein J. Nanotechnol. 2020, 11, 1707–1713, doi:10.3762/bjnano.11.153

• decisive role in the next generation of energy harvesting and energy scavenging systems. However, a large-scale application of thermoelectric devices requires the development of materials that have good thermoelectric features and are, at the same time, of low cost, technologically affordable and

Walking energy harvesting and self-powered tracking system based on triboelectric nanogenerators

• Mingliang Yao,
• Guangzhong Xie,
• Qichen Gong and
• Yuanjie Su

Beilstein J. Nanotechnol. 2020, 11, 1590–1595, doi:10.3762/bjnano.11.141

• are able to continuously light up 110 light-emitting diode bulbs. In addition, a self-powered location-tracking system was prepared for pedestrian volume counting and passenger tracing with the purpose of reducing energy consumption in public areas. The proposed walking energy harvesting device is

• flexible, feasible, and unaffected by season, climate, or location. This work not only proposes a strategy for mechanical energy harvesting in public areas, including subway stations, hospitals, shopping malls, and business streets, but also offers a novel solution for smart cities and low-carbon

• diode (LED) bulbs. In addition, by integrating the u-TENGs with six electrode channels, a self-powered location-tracking system was developed. This walking energy harvesting device is flexible, durable, and feasible, regardless of the time of the day, season, climate, and weather, which makes it an

Triboelectric nanogenerator based on Teflon/vitamin B1 powder for self-powered humidity sensing

• Liangyi Zhang,
• Huan Li,
• Yiyuan Xie,
• Jing Guo and
• Zhiyuan Zhu

Beilstein J. Nanotechnol. 2020, 11, 1394–1401, doi:10.3762/bjnano.11.123

• ]. Recently, TENG-based sensors have attracted increased attention [34][35][36][37][38][39][40][41]. In 2014, Ga-doped ZnO was used for the fabrication of piezo-humidity sensors with a high sensitivity and a fast response [42]. In 2018, Vivekananthan et al. proposed sustainable energy harvesting and battery

Effect of Ag loading position on the photocatalytic performance of TiO₂ nanocolumn arrays

• Jinghan Xu,
• Yanqi Liu and
• Yan Zhao

Beilstein J. Nanotechnol. 2020, 11, 717–728, doi:10.3762/bjnano.11.59

• solar energy harvesting in photovoltaic and photocatalytic applications owing to their extremely high visible-light absorption and tuned effective band gap. In this work, Ag-loaded TiO2 nanocolumn (Ag-TNC) arrays were fabricated based on anodic aluminum oxide (AAO) template by combining atomic layer

Review of advanced sensor devices employing nanoarchitectonics concepts

• Katsuhiko Ariga,
• Tatsuyuki Makita,
• Masato Ito,
• Taizo Mori,
• Shun Watanabe and
• Jun Takeya

Beilstein J. Nanotechnol. 2019, 10, 2014–2030, doi:10.3762/bjnano.10.198

• electricity have recently been given much attention as self-powered systems. These systems can be designed using nanoarchitectonic principles with various sensing materials to form energy harvesting self-powered sensors [97][98]. Chen and co-workers introduced a perfluorosulfonic acid ionomer as a water-vapor

• signals can work as energy harvesting devices from wind and raindrops. Similarly, Liao, Wang, and co-workers used a triboelectric nanogenerator system of thin films of fluorinated ethylene propylene to fabricate self-powered wind sensors operating in free-standing mode (anemometer triboelectric

Tailoring the magnetic properties of cobalt ferrite nanoparticles using the polyol process

• Malek Bibani,
• Romain Breitwieser,
• Alex Aubert,
• Vincent Loyau,
• Silvana Mercone,
• Souad Ammar and
• Fayna Mammeri

Beilstein J. Nanotechnol. 2019, 10, 1166–1176, doi:10.3762/bjnano.10.116

• nanoelectronics [1] and energy harvesting [2][3]. They consist of two components, one being ferromagnetic, and the other being ferroelectric. A wide range of inorganic nanostructures, defined by their connectivity, have been prepared using different synthetic approaches. Andrew et al. published a critical

Co-doped MnFe₂O₄ nanoparticles: magnetic anisotropy and interparticle interactions

• Bagher Aslibeiki,
• Parviz Kameli,
• Hadi Salamati,
• Giorgio Concas,
• Maria Salvador Fernandez,
• Alessandro Talone,
• Giuseppe Muscas and
• Davide Peddis

Beilstein J. Nanotechnol. 2019, 10, 856–865, doi:10.3762/bjnano.10.86

• different magnetic anisotropy opens interesting perspectives for applications in biomedical fields (e.g., MRI, drug delivery, hyperthermia) [20][21] and energy harvesting. Experimental Synthesis Several samples consisting of manganese ferrite nanoparticles with different cobalt doping, i.e., Mn1−xCoxFe2O4

Enhancement in thermoelectric properties due to Ag nanoparticles incorporated in Bi₂Te₃ matrix

• Srashti Gupta,
• Dinesh Chandra Agarwal,
• Bathula Sivaiah,
• Sankarakumar Amrithpandian,
• Kandasami Asokan,
• Ajay Dhar,
• Binaya Kumar Panigrahi,
• Devesh Kumar Avasthi and
• Vinay Gupta

Beilstein J. Nanotechnol. 2019, 10, 634–643, doi:10.3762/bjnano.10.63

• Engg and Tech. Longowal, Punjab-148106, India Physics of Energy Harvesting Division, CSIR - National Physical Laboratory, Delhi-110007, India Materials Physics Division, Indira Gandhi Centre for Atomic Research, Kalpakkam-603102, India Material Science, Inter University Accelerator Centre, New Delhi

Nonlinear effect of carrier drift on the performance of an n-type ZnO nanowire nanogenerator by coupling piezoelectric effect and semiconduction

• Yuxing Liang,
• Shuaiqi Fan,
• Xuedong Chen and
• Yuantai Hu

Beilstein J. Nanotechnol. 2018, 9, 1917–1925, doi:10.3762/bjnano.9.183

• proven to occur along the cross section. Because the semiconduction in ZNWs results in some electric leakage, a smaller initial carrier concentration is suggested to be more proper for energy-harvesting from a bent ZNW [31]. Because a small fluctuation of the carrier concentration implies a small

• voltage becomes very low. This phenomenon indicates again that a smaller initial carrier concentration is more proper for energy harvesting with a bent ZNW [31]. Figure 7a shows the distributions of the boundary electric potential for different end forces with n0 = 1·1023 m−3. The boundary electric

Interaction-tailored organization of large-area colloidal assemblies

• Silvia Rizzato,
• Elisabetta Primiceri,
• Anna Grazia Monteduro,
• Adriano Colombelli,
• Angelo Leo,
• Maria Grazia Manera,
• Roberto Rella and
• Giuseppe Maruccio

Beilstein J. Nanotechnol. 2018, 9, 1582–1593, doi:10.3762/bjnano.9.150

• applications in many fields such as photonics/plasmonics [1], phononics [2][3], spintronics/magnonics [4][5], biosensors and energy harvesting [6][7][8]. For example, metal nanostructured systems, stimulated by incident light of a specific wavelength, can support localized surface plasmon resonant modes. The

Functional materials for environmental sensors and energy systems

• Michele Penza,
• Anita Lloyd Spetz,
• Albert Romano-Rodriguez and
• Meyya Meyyappan

Beilstein J. Nanotechnol. 2017, 8, 2015–2016, doi:10.3762/bjnano.8.201

• sensing and energy applications, carbon-based materials for chemical sensing and energy applications, piezoelectric and thermoelectric materials for energy harvesting applications, new nanotechnology-based sensors for monitoring gaseous and liquid pollutants, surface-sensitive spectroscopy for studying

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

Synthesis of graphene–transition metal oxide hybrid nanoparticles and their application in various fields

• Arpita Jana,
• Elke Scheer and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2017, 8, 688–714, doi:10.3762/bjnano.8.74

• in the synthesis process, such as reaction time, temperature, and precursor concentration, the morphology and size of these TMO NPs can be tuned, resulting in different and unique properties. These materials have a wide range of applications in electronics, optics, electrochemical, solar energy

• harvesting and so on. In order to further enhance their properties, TMO NPs have been hybridised with graphene where some disadvantages of the NPs can be offset by graphene. The common drawbacks of semiconductor NPs include their relatively low conductivity and high recombination rate of photogenerated